ANTITACK 40 (rubber detackifier)

Material Safety Data Sheet

View in PDF

PRODUCT DESCRIPTION

Antitack 40 is a zinc stearate based water based dispersion that is manufactured for the special antitack properties that is required in uncured rubber compounds. Is is easily miscible with water and no vigorous stirring is required to dilute to required percentage for use, by spraying, brush applications or coatings via a water trough.



APPLICATIONS

It can be applied in Latex Gloves, condoms, uncured Rubber compounds eg retreads, injection or moulded Rubber products (Cycle tire) etc,.


BENEFITS

  • Narrow particle size range
  • Reduced formulation cost
  • Easily dilutable with water
  • Improved detackifier properties
  • Low powder residue on compounds

TYPICAL PROPERTIES

Average Particle Size ≤ 40 microns
Viscosity < 1500 cps
Specific Gravity 1.01 - 1.10
Appearance White free flowing liquid

CLASIFICATION

Molecular Formula Zn(Stearate)2
CAS No.

PACKING

It is packed in 160 kg open top PP drums or 1,000 kg IBC Tanks.


STORAGE

Store in cool, dry conditions and keep away from direct heat source and sunlight. When not using the material always seal the packing.


SHELF LIFE

At least 12 months when stored in sealed packing under above mentioned conditions.


DISCLAIMER : The information contained herein is to the best of our knowledge accurate and current and is given in good faith without warranty. Users are deemed to have satisfied themselves in independently as to the suitability of our products for their particular purpose. In no event shall MG Chemicals be liable for consequent or incidental damages.