ANTITACK CS-5  CS Dispersion – 50% solids (Release Agent – powder free glove applications)

Material Safety Data Sheet

View in PDF


OUR Antitack CS-5 which is a Calcium Stearate based dispersion is a specially formulated fatty acids soap dispersion that is manufactured for the special antitack properties that is required in latex glove manufacturing applications. It is easily miscible with water and no vigorous stirring is required to dilute to required percentage for use in the coagulant tank together with calcium nitrate for powder free gloves manufacture –especially for NR latex gloves production.


It can be as release agent in powder free Latex Gloves, condoms, uncured rubber compounds eg retreads, injection or moulded rubber products (Cycle tire) etc,.


  • Partially soluble in water
  • Ease of use, less foamy


  • Reduced formulation cost
  • Improved detackifier properties


pH @30 Deg C 8.0 -11.0
Physical Form Milky white to Off white liquid
Specific Gravity 1.01 - 1.04
Viscosity -cps 40 – 500, sp No 4 30 deg C
Total Solids 50 +/- 2.5%


Molecular Formula Stearic Acid Calcium Salt
CAS No. 1592-23-0


It is packed in 200 kg open top HDPE/PP drums


Store in cool, dry conditions and keep away from direct heat source and sunlight. When not using the material always seal the packing.


At least 6-9 months when stored in sealed packing under above mentioned conditions.

DISCLAIMER : The information contained herein is to the best of our knowledge accurate and current and is given in good faith without warranty. Users are deemed to have satisfied themselves in independently as to the suitability of our products for their particular purpose. In no event shall MG Chemicals be liable for consequent or incidental damages.