Biotack N (mould release agent – NBR gloves)

FUNCTIONAL Mould Release Agent – glove applications

Material Safety Data Sheet

View in PDF


Biotack N is a water based mixed fatty acid soap dispersion that is manufactured for the special antitack properties that is required in latex glove manufacturing applications. It is slightly soluble in water and no vigorous stirring is required to dilute to required percentage for use in the coagulant tank together with calcium nitrate for powder free gloves manufacture – both NR and NBR based. Will not leave powder marks on gloves unlike other antitack currently used in the market. Cleaning of the formers is very easy with our surfactant Marpol 330, and cleaning bath could be recycled by filtering and precipitation method, thus saving costs in cleaning chemicals.


  • Ease of Use, Partially soluble inn water
  • Imrpoved antitack properties
  • Lower Dosage : 0.5-0.6%
  • Reduced production cost – cleaning chemicals can be recycled


pH -1% soln 9.0 -13.0
Physical Form Viscous liquid to semi paste
Specific Gravity < 1.0
Appearance White to pearly color
Total Solids 20 +/- 2%


Molecular Formula Mixed Fatty palm based salt
CAS No. 593-29-3


It is packed in 180 kg open top PP drums


Store in cool, dry conditions and keep away from direct heat source and sunlight. When not using the material always seal the packing.


At least 6-9 months when stored in sealed packing under above mentioned conditions.

DISCLAIMER : The information contained herein is to the best of our knowledge accurate and current and is given in good faith without warranty. Users are deemed to have satisfied themselves in independently as to the suitability of our products for their particular purpose. In no event shall MG Chemicals be liable for consequent or incidental damages.